1. How to avoid quartz countertop cracks?
1) In the process of designing and splicing, users need to consider that quartz stone has the characteristics of thermal expansion and cold contraction. Therefore, in the process of splicing, a certain gap should be reserved, so as to avoid thermal expansion in the future. The problem of extrusion and cracking of quartz stone countertops occurs.
2) The edge of the hole should be ground evenly. Quartz stone stoves will be punched in the sink and other positions. Therefore, the user must perform corresponding grinding during the process of opening the hole. It can be too small, and don't wait for extrusion when it is used, it will cause cracks on the quartz stone countertop.
3) Reserve a space for expansion. During the construction and installation process, users need to pay attention to leaving enough space for expansion on the wall. If you are worried that the expansion space will cause water to flow to the back of the cabinet, you may wish to put it on the wall. Install a water barrier so that you don't have to worry about the water running down the bottom.
2. How to repair quartz cracks?
Clean up the cracks first, and use glue and curing agent to mix in a ratio of 10:1; apply glue after mixing, and stick masking tape around the cracks during the application process, so that it will be better cleaned after construction ; finally, after the glue is dry, tear off the tape and sand the glue with sandpaper.
