It is not recommended to use wax to prevent stone surface

Waxing on the stone surface is an early protection method. It can effectively prevent water, dirt and oil in a short time. However, after waxing the stone surface, there is a sticky layer on the surface. The sticky layer is flammable and explosive and sticks to dust and dirt. .

At the same time, the capillary pores of the stone are blocked, and the water inside the stone cannot seep out, which is easy to cause water spots or water stains; it is not easy to remove the wax-coated buttons, and it is difficult to use new protective agents in the future; after using wax protection, it is necessary to wax frequently. Especially in public places; the weather resistance is poor, and it is not wear-resistant.

Although wax as the first generation of stone curing agent has been greatly improved in function in recent years, such as fluidity, viscosity, gloss, etc., there are qualitative improvements, but as long as the protective agent still has wax components, There are more or less the above disadvantages in stone maintenance.

Therefore, it is recommended that stone decoration should be based on multi-functional penetrating protective materials.