The main function of the skirting line is to make the connection between the wall and the ground firm, reduce the deformation of the wall, avoid damage caused by external force collisions, and also reduce the contamination of the wall by splashing dirty water on the wall when the floor is mopped. Of course, the stair skirting line also has this function.
When the steps of the stairs are made of stone, it is recommended that the skirting of the stairs be made of stone, so that the material of the entire staircase will be more beautiful, and it will also be more convenient for the closing between the skirting and the steps.
Now, let's talk about the design styles of the stone skirting line for stairs.
1. Single side of flat grinding
The height of the skirting line is about 60-100mm higher than the beveled edge of the outer edge of the steps, and the processing method is only to grind one side of the upper edge of the skirting line.
This is the easiest way and the most cost-effective way. The skirting line is pressed on the wall, that is to say, the skirting line protrudes from the wall by a thickness of a layer of stone slab.
2. Grinding skirting lines
The height of the skirting line is also about 60-100mm higher than the beveled edge of the outer edge of the steps, and the processing method is to grind 40-70mm lines on the skirting line.
This method is generally more suitable for European, American, French and other styles. In this way, the skirting line is generally thicker than the thickness of the stone board protruding from the wall.
3. Make a small platform and turn it at a right angle
The height of the skirting line is about 30-100mm higher than the slope of the outer edge of the steps. The processing method is to have a platform surface of about 30-80mm near the wall, and then turn it at a right angle and close the stairs.
