Marble Composite Ceramic Panels have a double-layer structure of marble slabs, high-strength, low-water absorption tiles and curable liquid adhesives. The thickness of the marble slabs is only 1/3-1/4 of the existing ones. The weight of the bonded composite board is about 1/2 of the same size of the ordinary marble board.
Without changing the decorative effect of marble, the brittleness of natural marble can be overcome to a great extent. It also enhances the strength of the marble panel, reduces the weight and color difference of the natural marble panel, and saves marble resources.
The advantages of natural marble are in nature, and the disadvantages are also in nature. Natural marble has low flexural strength with 10mpa, and according to the specifications, the tiles are only 10mm-14mm thick. The flexural strength of natural marble is low, generally around 10mpa. It is easy to break, especially larger and longer boards are more likely to break, so the thickness of natural marble is generally between 20mm and 25mm. Due to the thickness of natural marble, it brings the weight per square meter, which also increases the transportation cost and the difficulty of paving. It will also take up the space of the building and the load of the building, and also increase the cost of the building.
Natural marble has low density, and there are microporous gaps that cannot be detected by the naked eye. Slate is easy to absorb water and seepage when cutting, so pay attention to cleaning when paving and after use. Once the seepage is difficult to eliminate, it will lose its luster and affect the decorative effect. Therefore, relevant protection must be done before construction, and frequent care after use is also required, which is troublesome and increases costs. Marble tiles can avoid these problems.
Natural marble has flaws, cracks, and large color differences, which are uncontrollable natural properties. There is a saying in the stone industry: "Marble without cracks is not marble", so in the production process of large slabs, there is an inevitable process: Glue, Finished with resin material. Moreover, a piece of stone is cut into multiple panels, the color texture changes greatly, and the color difference is another headache. Therefore, the marble material must be arranged in quantity before leaving the factory to ensure that the color difference will not be too large. During the construction process, once damaged, It's hard to find tonal textures to complement. Using marble ceramic composite, there is no such problem.
