Material Analysis:
Use 20mm marble and 12mm glazed ceramic tiles for the installation.
Marble installation can be done using ordinary Portland cement mixed with fine or coarse sand or with a specialized AB adhesive designed for stone.
For wall tiles, use ordinary Portland cement or adhesive. Stone surfaces require six-side protection to avoid damage.
For the finished surface, use a specialized joint filler for grouting, wiping the joints, and cleaning. Apply a protective film to protect the finished product.
Detailed Procedure:
Preparation Work: Plan the site and ensure all necessary materials and tools are on hand.
Site Layout: Mark out the areas for installation to guide material placement.
Material Processing: Cut and shape materials as needed based on the design.
Substrate Treatment: Prepare the base layer to ensure it's even and ready for bonding.
Cement-Sand Combination Layer: Apply a layer of cement mixed with sand as the bonding agent.
AB Adhesive for Stone: Use specialized AB adhesive for fixing the marble.
Install Stone and Wall Tiles: Lay the stone and tiles according to the planned layout.
Grouting and Cleaning: Fill the joints with grout, wipe them clean, and ensure the surface is spotless.
Final Surface Treatment: Protect the finished surface with a specialized protective film to avoid damage during subsequent work or usage.
